Linear Slot Diffuser- Aluminum

Product Features:

• Fully extruded aluminum construction
• Diffusers available with 1 to 4 slots
• Available with 1/2" - 3/4" - 1" slot widths
• Faceplate thickness/profile for the DASL is 0.055”
• Aerodynamic ice-tong controllers allow for 180 pattern control. Controllers made from extruded aluminum for corrosion resistance and reduced noise
• Available in any length. Lengths over 84" are joined together with provided alignment pins for continuous appearance
• Maximum length of pattern controllers is 60". Lengths over 60" will be provided with multiple pattern controllers
• Available without pattern controllers for return applications
• Durable white powder coat finish

Linear Slot Diffuser - Specs

DASL - Diffuser Supply

---

Measuring - Dimensions

Measurements

Measurement Chart

Length Considerations

• Add 1-1/2" to Length for Overall Outside Dimension
• Subtract 1/2" from Length for Overall Inside Dimension

---

Mounting Options

Screw Holes

Concealed Bracket (+10%)

Lay In / No Mounting

---

Field Cutting

• DASL are ordered to length from factory but can be cut to size in the field. Use a fine tooth, high speed, carbon blade for cutting aluminum.
• A maximum of 3" can be cut from each end (X).
• For adjustments of more than 2" slide the retaining clip against support.
• Diffusers can be adjusted up to 6" by cutting both ends.
• Remove end caps before cutting and reattach once cut.

Airflow Patterns

One Slot

Two Slots