
The Premium TALL Series offers the same options and versatility of the Premium Series, just with an added 2" of height. This accommodates baseboard heaters that have a taller profile than the industry standard. It is available in every common panel length and accessory configuration, providing the most comprehensive solution for your project. If it’s not part of the Premium line, you don’t need it.
Panel Lengths
2', 3', 4', 5', 6' & 7' standard panel lengths (8.75" H x 3" D)
Finish
Semi-gloss white powder coat - Suitable for painting other colors if desired
Primary Accessories
Closed Endcaps, Inside Corners & Couplers
Additional Accessories
Open Endcaps, Zero Clearance Endcaps, Inside Corners and Outside Corners (90° & 135°)
Uses
Intended for Hydronic (hot water type) baseboard heaters. Use caution when using with electric baseboard heaters* as they operate at higher surface temperatures
*When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons.
Warranty
Lifetime
Premium Tall Baseboard Accessories
Open End Cap - Premium Tall
Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The left side is defined as YOUR left when facing the heater and vise versa. Premium TALL accessories will only fit Premium TALL panels.
Closed End Cap - Premium Tall
Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The right side is defined as YOUR right when facing the heater and vise versa. PremiumTALL accessories will only fit Premium TALL panels.
Additional Accessories
Wall Bracket
Typically used when the original back plate has been removed, when the original back plate is less than 7.25″ in height or in new construction environments. This wall bracket will mount ALL Baseboard panels we offer.
Inside Corner 135° - Premium Tall
Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The right side is defined as YOUR right when facing the heater and vice versa. Premium accessories will only fit Premium panels.
Inside Corner 90° - Premium Tall
Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The right side is defined as YOUR right when facing the heater and vice versa. Premium accessories will only fit Premium panels.
Outside Corner 135° - Premium Tall
Used when the copper pipe continues on straight through an adjacent wall. There must be at least 1/2″ of clearance between the edge of the back plate and the adjacent wall. The right side is defined as YOUR right when facing the heater and vice versa. Premium accessories will only fit Premium panels.


